The string: 'Queue element not found during deletion.'
2:
The code: -2
The string: '“vTypErr”-Invalid queue element.'
3:
The code: -3
The string: 'Core routine number out of range.'
4:
The code: -4
The string: 'Unimplemented core routine.'
5:
The code: -5
The string: '“SlpTypeErr”-invalid queue element.'
6:
The code: -8
The string: 'No debugger installed to handle debugger command.'
7:
The code: -17
The string: 'Driver can't respond to control call (or SetEntry error).'
8:
The code: -18
The string: 'Driver can't respond to status call (or SetEntry error).'
9:
The code: -19
The string: 'Driver can't respond to read call (or SetEntry err).'
10:
The code: -20
The string: 'Driver can't respond to write call (or SetEntry err).'
11:
The code: -21
The string: 'Bad Unit error.'
12:
The code: -22
The string: 'Unit empty error.'
13:
The code: -23
The string: 'Requested read/write permission does not match drivers open permission.'
14:
The code: -24
The string: 'Close failed.'
15:
The code: -25
The string: 'Attempt to remove an open driver.'
16:
The code: -26
The string: 'DrvrInstall couldn't find driver in resources.'
17:
The code: -27
The string: 'I/O call aborted by KillIO or abort error from Printing Manager.'
18:
The code: -28
The string: 'Can't perform I/O because driver not opened. If trying to access a network, AppleShare may be turned off in the Chooser.'
19:
The code: -29
The string: 'Unit table has no more entries.'
20:
The code: -30
The string: 'DCE extension error.'
21:
The code: -33
The string: 'File directory full, try deleting some files.'
22:
The code: -34
The string: 'Disk full, try deleting some files.'
23:
The code: -35
The string: 'No such volume.'
24:
The code: -36
The string: 'I/O error.'
25:
The code: -37
The string: 'Bad file name.'
26:
The code: -38
The string: 'File not open.'
27:
The code: -39
The string: 'End of file.'
28:
The code: -40
The string: 'Attempt to move marker before start of file.'
29:
The code: -41
The string: 'File won't fit in memory. Memory full (open) or file won't fit (load).'
30:
The code: -42
The string: 'Too many files open.'
31:
The code: -43
The string: 'File not found.'
32:
The code: -44
The string: 'Disk is write protected.'
33:
The code: -45
The string: 'File is locked.'
34:
The code: -46
The string: 'Volume is locked.'
35:
The code: -47
The string: 'Attempt to delete a file another application is using.'
36:
The code: -48
The string: 'Attempt to rename a file, using a duplicate filename.'
37:
The code: -49
The string: 'File already open with write permission.'
38:
The code: -50
The string: 'Error in user parameter list. If performing an alias operation, the alias record may be corrupt.'
39:
The code: -51
The string: 'RefNum error.'
40:
The code: -52
The string: 'Get file position error.'
41:
The code: -53
The string: 'Volume was ejected.'
42:
The code: -54
The string: 'Permissions error on open.'
43:
The code: -55
The string: 'Attempt to mount a volume that is already on-line.'
44:
The code: -56
The string: 'No such drive.'
45:
The code: -57
The string: 'This is not a Macintosh disk!'
46:
The code: -58
The string: 'Volume belongs to an external file system. If checking an Alias to a volume, the Alias couldn’t be resolved. AppleShare, Network Extension, File Sharing Extension, etc. are probably not installed.'
47:
The code: -59
The string: 'File system internal error:during rename the old entry was deleted but could not be restored.'
48:
The code: -60
The string: 'Bad master directory block.'
49:
The code: -61
The string: 'Write permissions error.'
50:
The code: -64
The string: 'Drive not installed, or error during font declaration.'
51:
The code: -65
The string: 'Read/Write requested for an off-line drive, or font not declared.'
52:
The code: -66
The string: 'Couldn't find 5 nybbles in 200 tries (disk error).'
53:
The code: -67
The string: 'Couldn't find valid addr mark.'
54:
The code: -68
The string: 'Read verify comparison failed.'
55:
The code: -69
The string: 'Addr mark checksum didn't check.'
56:
The code: -70
The string: 'Bad addr mark bit slip nibbles.'
57:
The code: -71
The string: 'Couldn't find a data mark header.'
58:
The code: -72
The string: 'Bad data mark checksum.'
59:
The code: -73
The string: 'Bad data mark bit slip nibbles.'
60:
The code: -74
The string: 'Write underrun occurred.'
61:
The code: -75
The string: 'Step handshake failed.'
62:
The code: -76
The string: 'Track 0 detect doesn't change.'
63:
The code: -77
The string: 'Unable to initialize Integrated Woz Machine.'
64:
The code: -78
The string: 'Attempt to read the second side of a one-sided drive.'
65:
The code: -79
The string: 'Unable to correctly adjust disk speed.'
66:
The code: -80
The string: 'Track number wrong on address mark.'
67:
The code: -81
The string: 'Sector number never found on a track.'
68:
The code: -82
The string: 'Can't find sector 0 after track format.'
69:
The code: -85
The string: 'Unable to read same clock value twice.'
70:
The code: -86
The string: 'Time written did not verify.'
71:
The code: -87
The string: 'Parameter RAM written didn't read-verify.'
72:
The code: -88
The string: 'InitUtil found the parameter ram uninitialized.'
73:
The code: -89
The string: 'SCC receiver error (framing; parity; OR).'
74:
The code: -90
The string: 'Break received (SCC).'
75:
The code: -91
The string: 'AppleTalk error in socket number.'
76:
The code: -92
The string: 'AppleTalk data length too big.'
77:
The code: -93
The string: 'AppleTalk error: no network bridge for non-local send.'
78:
The code: -94
The string: 'AppleTalk error in attaching/detaching protocol.'
79:
The code: -95
The string: 'AppleTalk error: excessive collisions on write.'
80:
The code: -96
The string: 'AppleTalk error: driver Open error code (port is in use).'
81:
The code: -97
The string: ''
82:
The code: -98
The string: 'AppleTalk error: driver Open error code (parameter RAM not configured for this connection).'
83:
The code: -99
The string: 'AppleTalk error: hard/soft error in ROZ.'
84:
The code: -100
The string: 'Scrap does not exist.'
85:
The code: -102
The string: 'No object of that type in the scrap.'
86:
The code: -108
The string: 'Out of memory.'
87:
The code: -109
The string: 'Handle was NIL in HandleZone or other.'
88:
The code: -110
The string: 'Address was odd or out of range.'
89:
The code: -111
The string: 'WhichZone failed (applied to free block).'
90:
The code: -112
The string: 'Attempt to purge a locked or non-purgeable block.'
91:
The code: -113
The string: 'Address in zone check failed.'
92:
The code: -114
The string: 'Pointer check failed.'
93:
The code: -115
The string: 'Block check failed.'
94:
The code: -116
The string: 'Size check failed.'
95:
The code: -117
The string: 'Attempt to move a locked block with MoveHHi.'
96:
The code: -120
The string: 'Directory not found.'
97:
The code: -121
The string: 'No free WDCB available.'
98:
The code: -122
The string: 'Move into offspring error (file manager).'
99:
The code: -123
The string: 'Wrong volume type error (operation not supported for MFS).'
100:
The code: -124
The string: 'Server volume has been disconnected.'
101:
The code: -125
The string: 'Not enough memory to update pixMap.'
102:
The code: -126
The string: 'System error code for Menu Bar Def Proc not found.'
103:
The code: -127
The string: 'Could not find HMenu's parent in MenuKey.'
104:
The code: -128
The string: 'The user cancelled the operation.'
105:
The code: -130
The string: 'HFS FileID: no file thread exists.'
106:
The code: -131
The string: 'HFS FileID: directory specified.'
107:
The code: -132
The string: 'HFS FileID: file ID already exists.'
108:
The code: -145
The string: 'noMemForPictPlaybackErr'
109:
The code: -147
The string: 'Region too complex.'
110:
The code: -148
The string: 'Pixel map too big. Pixmap is not 1-bit per pixel for BitmapToRegion. '
111:
The code: -149
The string: 'Insufficient stack space. QuickDraw could not complete the operation.'
112:
The code: -150
The string: 'Match error. Color2Index failed to find an index.'
113:
The code: -151
The string: 'Error with temporary memory.'
114:
The code: -152
The string: 'No memory error.'
115:
The code: -153
The string: 'Range error on color table request.'
116:
The code: -154
The string: 'ColorTable entry protection violation.'
117:
The code: -155
The string: 'Invalid type of graphics device.'
118:
The code: -156
The string: 'Invalid resolution for MakeITable.'
119:
The code: -157
The string: 'Invalid pixel depth passed to NewGWorld or UpdateGWorld.'
120:
The code: -158
The string: 'cParmError in QD-32.'
121:
The code: -185
The string: 'Extended resource has a bad format.'
122:
The code: -186
The string: 'Resource bent ("the bends") - can't decompress a compressed resource.'
123:
The code: -192
The string: 'Resource not found.'
124:
The code: -193
The string: 'Resource file not found.'
125:
The code: -194
The string: 'AddResource failed.'
126:
The code: -195
The string: 'AddReference failed.'
127:
The code: -196
The string: 'RmveResource failed.'
128:
The code: -197
The string: 'RmveReference failed.'
129:
The code: -198
The string: 'Attribute inconsistent with resource operation.'
130:
The code: -199
The string: 'Map inconsistent with resource operation.'
131:
The code: -200
The string: 'No hardware for sound.'
132:
The code: -201
The string: 'Not enough hardware for sound.'
133:
The code: -204
The string: 'Resource problem with sound.'
134:
The code: -205
The string: 'Bad sound channel.'
135:
The code: -206
The string: 'Bad sound format.'
136:
The code: -207
The string: 'Could not allocate enough memory (Sound Mgr).'
137:
The code: -208
The string: 'Sound Mgr: was not type AIFF or was of bad format, corrupt.'
138:
The code: -209
The string: 'Sound channel is being used for a PFD already.'
139:
The code: -210
The string: 'Sound Mgr. can not operate in the memory allowed.'
140:
The code: -360
The string: 'Invalid slot # error.'
141:
The code: -400
The string: 'gcr format on high density media error.'
142:
The code: -500
The string: 'Region passed to BitMapToRegion is too big.'
143:
The code: -927
The string: 'Unable to authenticate user at destination.'
144:
The code: -928
The string: 'Invalid user reference number.'
145:
The code: -930
The string: 'Illegal service type, or not supported.'
146:
The code: -931
The string: 'Location name malformed.'
147:
The code: -932
The string: 'Destination port requires authentication.'
148:
The code: -1300
The string: 'No file thread exists.'
149:
The code: -1301
The string: 'File id already exists.'
150:
The code: -1302
The string: 'Directory specified.'
151:
The code: -1303
The string: 'Files on different volumes.'
152:
The code: -1304
The string: 'The catalog has been modified. If Alias Assassin was scanning in the background, and you changed any directories on the disk being scanned, this could occur. Not fatal; try scanning again.'
153:
The code: -1305
The string: 'Desktop database files are corrupted.'
154:
The code: -1306
The string: 'Can't exchange a file with itself.'
155:
The code: -1307
The string: 'File id is dangling or doesn't match with the file number.'
156:
The code: -4098
The string: 'LaserWriter request already active.'
157:
The code: -4099
The string: 'Write request too big for LaserWriter.'
158:
The code: -4100
The string: 'LaserWriter connection just closed.'
159:
The code: -4101
The string: 'LaserWriter not found or closed.'
160:
The code: -5000
The string: 'AppleTalk: Incorrect access for this file/folder.'
161:
The code: -5001
The string: 'AppleTalk: authorization continue.'
162:
The code: -5002
The string: 'AppleTalk: bad UAM.'
163:
The code: -5003
The string: 'AppleTalk: bad version number.'
164:
The code: -5004
The string: 'AppleTalk: bit map error.'
165:
The code: -5005
The string: 'AppleTalk: can’t move error.'
166:
The code: -5006
The string: 'AppleTalk: permission/deny mode conflict. '
167:
The code: -5007
The string: 'AppleTalk: directory not empty.'
168:
The code: -5008
The string: 'AppleTalk: disk full.'
169:
The code: -5009
The string: 'AppleTalk: End-of-File error.'
170:
The code: -5010
The string: 'AppleTalk: file busy.'
171:
The code: -5011
The string: 'AppleTalk: flat volume.'
172:
The code: -5012
The string: 'AppleTalk: item not found.'
173:
The code: -5013
The string: 'AppleTalk: lock error.'
174:
The code: -5014
The string: 'AppleTalk: misc. error.'
175:
The code: -5015
The string: 'AppleTalk: byte range locking error from server.'
176:
The code: -5016
The string: 'AppleTalk: no server.'
177:
The code: -5017
The string: 'AppleTalk: object already exists.'
178:
The code: -5018
The string: 'AppleTalk: object not found.'
179:
The code: -5019
The string: 'AppleTalk: parameter error.'
180:
The code: -5020
The string: 'AppleTalk: attempt to unlock an already unlocked range.'
181:
The code: -5021
The string: 'Attempt to lock some of an already locked range.'
182:
The code: -5022
The string: 'AppleTalk: session closed.'
183:
The code: -5023
The string: 'AppleTalk: user not authorised.'
184:
The code: -5024
The string: 'AppleTalk: call not supported.'
185:
The code: -5025
The string: 'AppleTalk: object type error.'
186:
The code: -5026
The string: 'AppleTalk: too many files open.'
187:
The code: -5027
The string: 'AppleTalk: server going down.'
188:
The code: -5028
The string: 'AppleTalk: can’t rename.'
189:
The code: -5029
The string: 'AppleTalk: directory not found.'
190:
The code: -5030
The string: 'AppleTalk: icon type error.'
191:
The code: -5031
The string: 'AppleTalk: volume is read only.'
192:
The code: -5032
The string: 'AppleTalk: object is M/R/D/W inhibited.'
193:
The code: -5500
The string: 'SysEnvirons not present.'
194:
The code: -5501
The string: 'SysEnvirons passed negative version number.'
195:
The code: -5502
The string: 'SysEnvirons passed version number beyond what the call can handle.'
196:
The code: -8132
The string: 'LaserWriter manual feed time out.'
197:
The code: -8133
The string: 'General PostScript error.'
198:
The code: -8150
The string: 'No LaserWriter chosen.'
199:
The code: -8151
The string: 'Version mismatch between LaserPrep dictionaries.'
200:
The code: -8160
The string: 'LaserWriter zoom scale factor out of range.'
